Product Description For CPE710
Concentrated administration for up to 500 Omada passageways, JetStream switches, and SafeStream switches.
Cloud admittance to oversee from anyplace, whenever.
Locally screen and oversee gadgets with a definitive security and steadiness.
The Omada application for helpful administration.
Industry-driving equipment plan with an incredible chipset, tough metal packaging, and USB 3.0 port for auto reinforcement.
Cluster the board, multi-site the executives, and far off firmware refreshes benefit network support.
The simple to-utilize dashboard makes it simple to see your constant organization status and really look at network utilization and traffic dispersion.
Network geography helps IT administrators rapidly see and investigate associations initially.
Specification:
HARDWARE FEATURES | |
---|---|
Processor | Qualcomm 750MHz CPU, MIPS 74Kc |
Memory | 128 MB DDR2 RAM, 16 MB Flash |
Interface | 1 10/100/1000 Mbps Shielded Ethernet Port (LAN/POE) 1 Reset Button |
Power Supply | Passive Power over Ethernet via LAN (+4,5pins; -7,8pins) Voltage range: 16-27V DC |
Dimensions ( W x D x H ) | 14.4 x 11.0 x 8.1 in. (366 x 280 x 207 mm) |
Antenna Gain | 23 dBi |
Antenna Beamwidth | 9° (Azimuth)/7° (Elevation) |
Protection | 15 KV ESD Protection 6 KV Lightning Protection |
Enclosure | Material: Outdoor PC stabilized plastic Weatherproof: IP65 water and dust proof design |
WIRELESS FEATURES | |
---|---|
Wireless Standards | IEEE 802.11a/n/ac |
Wireless Speeds | Up to 867 Mbps (80 MHz, Dynamic) Up to 400 Mbps (40 MHz, Dynamic) Up to 173.4 Mbps (20 MHz, Dynamic) |
Frequency | 5.15–5.85 GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. |
Transmit Power | Max. 27 dBm (Adjustable power by 1dBm) |
SOFTWARE FEATURES | |
---|---|
Network Configuration | WAN: Static/ Dynamic/ PPPoE LAN: Static/ Dynamic/ DHCP Forwarding: ALG/ UPnP/ Virtual Server/ Port Trigger Security: SPI Firewall/ Ping Forbidden/ DoS Protection Access Control Static Routing Bandwidth Control IP & MAC Binding |
Wireless Configurations | Selectable channel width: 20, 40 or 80MHz Automatic Wi-Fi channel selection RF transmit power adjustment in 1 dB step Dynamic Frequency Selection (DFS) WDS Enable/ Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption, SSID broadcast enable/ disable Multi-SSID with VLAN tagging in AP mode Distance/ ACK timeout setting Wireless MAC address filter Wireless advanced features: Beacon interval, RTS threshold, fragmentation threshold, DTIM interval, AP isolation, short GI, Wi-Fi multimedia Long range point-to-point |
Management | Discovery and Remote Management with Pharos Control (Windows) HTTP/ HTTPS Web-based management System log SNMP agent (v2c) Ping watchdog Dynamic DNS SSH server |
System Tools | Indicators:Signal Strength, Noise, Transmit CCQ, CPU, and Memory usage Monitors: Throughput, Stations, Interfaces, ARP, Routes, WAN, and DHCP Spectrum Analyzer Speed Test Ping Traceroute Antenna Alignment |
System-level Optimizations | Optimized IGMP Snooping / Proxy for multicast applications |
POE ADAPTER FEATURES | |
---|---|
Dimensions(W x D x H) | 3.3 x 1.7 x 1.2 in. (85 × 44 × 30 mm) |
Interfaces | 1 AC Jack with Earth Ground 1× 10/100/1000 Mbps Shielded Ethernet Port (Power + Data) 1× 10/100/1000 Mbps Shielded Ethernet Port (Data) |
Button | Remote Reset Button |
Power Status LEDs | Green |
Input | 100-240VAC, 50/60Hz |
Output | 24VDC, 0.5A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
Efficiency | > 84.29% |
Certifications | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
OTHERS | |
---|---|
Certification | CE, FCC, RoHS, IP65 |
Package Contents | Outdoor Wireless CPE 24V 0.5A Passive PoE Adapter Pole Mounting Kits AC Power Cord Installation Guide |
Environment | Operating Temperature: -40℃~70℃ (-40℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing |
There are no reviews yet.