Cisco MFT VWIC3 cards plug into EHWIC slots on Cisco 1921, 1941, 1941W, 2901, 2911, 2921, 2951, 3925, 3945, 3925E, and 3945E routers. The T1 / E1 MFT VWIC3 cards support both T1 and E1 and provide more flexibility in configuring the Cisco MFT VWIC3 to provide slight support for T1, T1, E1 and E1 for audio and broadband applications. All VWIC3 MFTs have drop-and-insert capabilities that eliminate the cost of external channel servers / data servers (CSUs / DSUs) and multiple drop-and-inserts.
.Quick Spec
| VWIC3-1MFT-T1/E1 |
| Manufacturer |
Cisco |
| Part Number |
VWIC3-1MFT-T1/E1 |
| Device Type |
Interface module |
| Form factor |
1-Port T1/E1 Multiflex Trunk Voice/WAN Interface Card |
| Specifications |
| Number of Ports |
1 |
| T1 Support |
Yes |
| E1 Support |
Yes |
| Unstructured E1 (G.703) Support |
No |
| Data Support WIC Mode |
Yes |
| Voice Support VIC* |
Yes |
| Drop-and-Insert Multiplexing |
Yes |
| Configuration Comparison |
| Serial Data (channel-group*) |
2 total
2 per port |
| Voice CAS (ds0-group**) |
24 total (T1)
31 total (E1)
1 per timeslot |
| PRI (pri-group***) |
1 total
1 per port |
| Drop & Insert (tdm-group****) |
24 total (T1)
31 total (E1)
1 per timeslot |
| Network Management Features |
| Telnet or Console |
Remote and local configuration, monitoring, and troubleshooting from Cisco IOS Software CLI |
| Simple Network Management Protocol (SNMP) |
• Router and DSU/CSU managed by single SNMP agent; router, DSU, and CSU appear as a single network entity to user
• Standard MIB (MIB II)
• Cisco Integrated DSU/CSU MIB
• RFC 1406 T1 MIB, Including Alarm Detection and Reporting |
| SNMP Traps |
Generated in response to alarms |
|
|
|
|
